FUJI Packing Seal PH00991
The seal closes the mating gap around the fitted port, shaft or housing.
Reference image · Catalogue photo
Packing Seal PH00991. White-background reference photograph.
- Part number / model
PH00991- Machine and configuration
- NXT IIIc / NXT II / AIMEX / NXT III
- Assembly specification
- Packing Seal. M3 III-X SLIDE 3/3 (CLAMPER) configuration.
- Order unit
- Each
Compatibility and selection
Confirm the M3 III-X SLIDE 3/3 (CLAMPER) configuration. Compare the thread and tube size or seal cross-section, and the original fitting geometry with your installed part. For the NXT IIIc m3 iiic-x slide 3/3 (clamper) configuration. Match the installed assembly and drawing position. Compare the groove or seat, seal dimensions, cross-section and material for the process fluid.
NXT IIIc · NXT II · AIMEX · NXT III
Installation conditions by model
- NXT II Parts list positions include M3 II-X SLIDE (CLAMPER) US01315, M6 II-X SLIDE (CLAMPER) US01512, QK03A02. Match the full installed assembly and any option or serial limit for your NXT II.
- AIMEX Parts list positions include XY-ROBOT 2UGMSA000108. Match the full installed assembly and any option or serial limit for your AIMEX.
- NXT III Parts list positions include M3 III-X SLIDE (CLAMPER) 2UGTSF000103, M6 III-X SLIDE (CLAMPER) 2UGTSG000104. Match the full installed assembly and any option or serial limit for your NXT III.
Identify your old part
Send the full number and suffix from the part, its packaging or service record. For an unmarked part, send measurements and show where it seats.
Check the installed fit
| Check | Reference | What to confirm |
|---|---|---|
| Seal geometry and material | PH00991 | Check seating and leakage under the specified service conditions. |
Original part status and alternatives
Original manufacturer status
Factory production status for PH00991 is pending confirmation.
China-made alternatives
China-made equivalent pending verification.
Ask for the alternate maker and order reference. Check seating and leakage under the specified service conditions.
Manufacturer successor for PH00991 awaits confirmation.
Buying options
Request a new genuine PH00991 quotation for the exact configuration. Confirm the offered condition and included parts in writing.
Lead time
Confirm the dispatch estimate for the requested quantity after the selected part and condition are agreed.
What to send
Send the full number and suffix from the part, its packaging or service record. For an unmarked part, send measurements and show where it seats.
Check stock and alternativesOrdering
Request PH00991 and the quantity in pieces. State the condition needed and confirm the supplied components and hardware on the quote.
Open your quote list to prepare your request and list the photos you will attach when sending it.
Frequently asked questions
What should I check before ordering PH00991?
Check seating and leakage under the specified service conditions.
How do I identify an unmarked part?
Use the service drawing position or the last purchase record to recover PH00991. Compare the full ordering suffix before requesting a quote.
