MPM 250 W Flex ATX Power Supply P13346
The 250 W Flex ATX supply converts the incoming supply into the DC outputs required by the fitted electronics and harness.
Reference image · Catalogue photo
Detail-limited catalogue photograph of the MPM P13346 power supply.
- Part number / model
P13346- Printer configurations
- Momentum II BTB / Momentum II 100
- Order unit
- Each
Compatibility and selection
Recommended spare for Momentum II BTB / Momentum II 100. Confirm the serial number and installed configuration before ordering.
250 W Flex ATX power supply in 1U format with PFC and 80 PLUS.
Identify your old part
Photograph the 250 W supply label, 1U mounting face and the full output harness laid out so each plug is visible.
Check the installed fit
| Check | Reference | What to confirm |
|---|---|---|
| Power rating | 250 W | Check output rails and current ratings against the installed unit. |
| Installation | Flex ATX, 1U, PFC and 80 PLUS | Match mounting holes, enclosure clearance and airflow direction. |
| Wiring | Use the installed harness as the reference | Match each plug and pinout before selecting a supply. |
Original part status and alternatives
Original manufacturer status
Production status awaits manufacturer confirmation.
China-made alternatives
China-made availability unverified.
Ordering
Request P13346 with the installed Flex ATX mounting dimensions, pinout and plug inventory.
Open your quote list to prepare your request and list the photos you will attach when sending it.
Frequently asked questions
Will any 250 W supply fit?
Check the Flex ATX envelope, 1U clearance, mounting holes and every output connector. The wattage alone cannot establish fit.
