Selection guide
How to Identify an SMT Tape Feeder by Width, Pitch and Part Number
An 8 mm feeder label identifies one dimension. Confirm the tape drawing, index pitch, machine interface and full feeder reference before replacing it.
Record the tape width and pocket spacing from the reel drawing. Then check the feeder’s full part number, supported indexing modes and the fitted machine interface.
Read the carrier tape drawing
Two tapes can share an 8 mm width and a 4 mm sprocket-hole pitch while their pockets are spaced at 1 mm and 2 mm. Use the actual reel’s drawing to confirm pocket pitch and the feeder’s supported indexing modes. In another example, the TI LMP91000SDX/NOPB package drawing specifies 12 mm tape and 8 mm between pockets. Keep those two numbers in separate fields.
| Code | What to record | Packaging example |
|---|---|---|
| W | Overall width of the carrier tape | 8 mm on Murata narrow-pitch paper tape. |
| P0 | Center-to-center distance between adjacent sprocket holes | 4 mm on the cited 8 mm Murata tapes. |
| P1 | Center-to-center distance between successive component pockets | 1 mm or 2 mm in the cited Murata examples. |
| A0, B0 and K0 | Pocket dimensions for the component’s width, length and thickness | Check these on the drawing for the exact packaged component. |
Confirm the feeder and its machine interface
Read the feeder’s full label and record the machine model, fitted cart or docking arrangement, and how many tape lanes the feeder supplies. A machine’s single- or dual-lane PCB transfer is a separate configuration from the number of tape lanes in a feeder.
For a replacement, compare the mounting latch, locating points, electrical interface and current configuration. Check supported reel sizes, paper or embossed tape, and which guide, reel holder and cover-tape handling parts are included. Confirm any required settings with the relevant machine documentation.
Use the specification for the exact feeder family
FUJI lists 1, 2 and 4 mm index pitches for a specific 8 mm auto-loading feeder. Its specification also compares indexing time with the W08F. Use the full assembly number on the offered feeder to confirm its own supported modes.
Panasonic’s NPM-GW configuration shows separate cart arrangements for Intelligent Tape Feeders and Auto Setting Feeders. The NPM-W2 machine specification gives supported tape widths within its listed configurations. For an NPM inquiry, identify the exact machine, cart and feeder generation before relying on a tape-width match.
Feeder and machine in this guide
What to ask for on the quote
- A readable nameplate photo and complete assembly number, including every suffix.
- Written confirmation of supported tape width and pitch for your reel, and of the machine or cart interface.
- The items included with the feeder. If you are buying used, ask what indexing or repeatability check was performed, with which setup and with what result.
Find other feeder references
Need a fit check for FUJI W08F?
The inquiry includes the feeder’s full reference. Add your machine, feeder cart and tape dimensions.


