Quote list 0

Selection guide

SMT Pickup Nozzle Selection by Head and Part Number

Use the installed head, the nozzle family and the component drawing to choose a pickup nozzle. Then confirm the full order number for the assembly or service part.

Yamaha pickup nozzle showing the 302A engraving
The 302A engraving gives the nozzle type. KHN-M7720-A3X is the complete assembly reference in the YSM10 parts table.
Before you order

Match the installed head and nozzle family before choosing by component size. Once the type fits, order the exact assembly, tip or spring your repair needs.

Match the machine, head and nozzle family

Begin with the machine model and the installed head. For example, the Yamaha YSM10 could be supplied with an HM or HM5 head. Record the nozzle family and the type called for in the production program, then check the ordering number in the parts record for your setup.

When comparing a different nozzle, check the mounting end, working length, tip profile and pickup opening against the manufacturer’s selection data or drawing. Confirm any recognition requirement listed for the head and component. A listing with the same short type or a similar-looking tip gives you a starting point for that check.

Yamaha YSM10
Yamaha YSM10 equipment reference. Record whether the installed head is HM or HM5 and check the nozzle family in the machine record.

Compare the Yamaha YSM10 nozzle families

The YSM10 maintenance manual lists these three assemblies in two separate families. The component codes in this table are metric. For example, 1608 means about 1.6 × 0.8 mm. Record the actual body dimensions when your component drawing uses inch package codes.

Scroll sideways to see all columns.

TypeFull assembly numberFamilyMetric component codes
302AKHN-M7720-A3XStandard 30X1608–3216
312AKHY-M7720-A3XNarrow-pitch 31X1005–1608
313AKHY-M7730-A2XNarrow-pitch 31X2012–3225
  • A component on the boundary can appear in two ranges. At 1608, check the installed nozzle family and the program’s assigned type before choosing between 302A and 312A.
  • For a component with an uneven or recessed top, send its top-view drawing and available pickup area. A length and width alone may leave the pickup surface unresolved.

Choose the assembly or the service part

For the 302A, KHN-M7720-A3X identifies the complete assembly. KHN-M7721-04X identifies the nozzle tip, and KHN-M7713-10X is the spring listed for this type. Specify which one you are buying, how many you need, and which items are included.

When a nozzle has more than one assembly generation, quote each acceptable version separately and document the machine or head condition for using it.

Check whether the problem points to the nozzle

If pickup or recognition errors repeat, record the assigned nozzle, head position, component and exact symptom. Contamination at the tip, a blocked opening and poor spring return are different checks in the YSM10 maintenance guidance. Follow the machine’s maintenance procedure and have the installed condition assessed before ordering a whole assembly.

For an alternative, agree on a sample and acceptance checks for the actual component and head. Useful checks include pickup, vision recognition, release and placement in your process.

Compare pickup nozzles by brand and type

Use the installed head and the full nozzle reference to narrow your selection.

Read next

All guides